-
-
May 2, 2018 at 5:32 am #184745
Nicole Mentzen
2020 ModeratorWe want to see your work! Share your 2020 Fusion designs & renderings here in the community or on our social channels.
Sharing in the community is easy: log-in with your account, create a post and either include a URL where people can find your awesome 360, or attach an image. To share on social just don´t forget to include the hashtag/@2020spaces.
Need some inspiration? Check out some designs of our Inspiration Contest winners here.
When submitting your designs, please also share your webpage and social media accounts (Instagram, Facebook, Twitter, LinkedIn…) for we can tag you correctly when pushing your fabulous designs through our social channels! Thank you!
-
May 4, 2018 at 11:09 am #185224
darren mckeown
Participantrecent design.
When submitting your designs, please also share your webpage and social media accounts (Instagram, Facebook, Twitter, LinkedIn…) for we can tag you correctly when pushing your fabulous designs through our social channels! Thank you!
-
February 25, 2021 at 10:56 am #317743
alex james
ParticipantI’ve been using Fusion 2020 for a month in my new job. Having fun with it.
-
-
May 4, 2018 at 7:44 pm #185350
Lukas -> www.szymtech.pl
Participantone of my favorit
Attachments:
-
May 18, 2018 at 11:25 am #187586
Glenn Watson
ParticipantOne we did recently
-
June 6, 2018 at 10:39 am #190227
Nicole Mentzen
2020 ModeratorThank you all for supplying those great designs. Keep them coming! We will share them on our social networks as well, for you get even more visibility on your work!
-
June 6, 2018 at 11:13 am #190315
Nicole Mentzen
2020 ModeratorThey are all awesome – thanks for sharing Richard. We will push them on several occasion.
-
July 31, 2018 at 3:33 am #196363
Glenn Watson
ParticipantHoping to put this into our showroom
Attachments:
-
July 31, 2018 at 4:47 am #196373
darren mckeown
ParticipantA nolte kitchen design recently done for a customer.
-
August 6, 2018 at 5:30 am #197211
Nicole Mentzen
2020 ModeratorGreat designs again! Would you mind sharing your social media accounts, for we can tag you when creating the posts? Thank you!
-
August 6, 2018 at 5:30 am #197212
Nicole Mentzen
2020 ModeratorGreat designs again! Would you mind sharing your social media accounts, for we can tag you when creating the posts? Thank you!
-
August 6, 2018 at 6:13 am #197215
Glenn Watson
ParticipantFB : https://www.facebook.com/handkliving/
Twitter: @handklivng @Hitchcock_King
Instagram: https://www.instagram.com/handkliving
-
August 6, 2018 at 6:14 am #197216
-
August 6, 2018 at 6:18 am #197219
Lukas -> www.szymtech.pl
ParticipantFB : SZYMTECH @ FB
INSTAGRAM : SZYMTECH @ Insta -
August 6, 2018 at 6:22 am #197220
-
August 6, 2018 at 6:23 am #197221
Lukas -> www.szymtech.pl
Participantrender vs reality
Attachments:
-
August 6, 2018 at 7:09 am #197241
Lukas -> www.szymtech.pl
Participantyou mean the project or the implementation ?
-
August 6, 2018 at 7:27 am #197244
Lukas -> www.szymtech.pl
Participant -
August 7, 2018 at 4:44 am #197294
Nicole Mentzen
2020 ModeratorHi Richard, I´ve forwarded the request to our content team, for they can have a look if they can add the function to the catalogue. Thank you, Nicole
-
November 1, 2018 at 10:56 am #213658
Glenn Watson
ParticipantI thought I’d do a Poppy inspired design to celebrate 100 years of WW1
Panorama can be found here
Lest we forget
-
November 1, 2018 at 11:24 am #213715
darren mckeown
ParticipantRecent design of a kitchen with a mixture of German Nolte Kitchen and our own.
Attachments:
-
February 18, 2019 at 5:10 am #227142
Philip Shelley
ParticipantA recent design using the new enhancement settings. Trying to get it as ‘photorealistic’ as possible.
-
February 18, 2019 at 2:56 pm #227212
Tomasz Fąfara
ParticipantMy projects
Attachments:
-
June 6, 2019 at 5:11 am #240283
James Wilson
2020 ModeratorLooks awesome Richard. Love the new lights 🙂 It may take a little longer to generate, but have you tried creating the Pano using the Fusion v7 Publish render?
James
-
June 6, 2019 at 5:15 am #240284
Richard
ParticipantCheers, James!
New lights are great! And these ones are exactly like the ones the client actually has in their home.
To be honest, I haven’t tried Pano in Publish render yet…. I had to leave this one to render overnight!
I will render the design again tonight in Publish, with the kitchen being fully dressed. 🙂
-
June 6, 2019 at 5:34 am #240285
James Wilson
2020 ModeratorYou’re welcome. If you wanted me to give it a go in v7 Publish, you could send me your design and I’ll share the result with you? james.wilson@2020spaces.com
-
June 7, 2019 at 4:14 am #240352
Richard
ParticipantIn response to your message about trying to process this 360 pano design in Publish render, I set it to process overnight at around 17:30 last night, and this morning it had still not completed, so it looks as though this is not something that is going to be possible.
I am emailing you the design now.
Cheers!
-
June 7, 2019 at 4:26 am #240354
James Wilson
2020 ModeratorThanks Richard – I’ll take a look as soon as it arrives.
-
June 7, 2019 at 5:27 am #240355
Lukas -> www.szymtech.pl
Participantwith FX7 it tooked around 20 h to render
-
June 12, 2019 at 6:41 am #240714
James Wilson
2020 ModeratorHi Richard, sorry, I didn’t receive your email with the design 🙁
-
June 12, 2019 at 6:46 am #240715
Richard
ParticipantHi James.
I have just forwarded this on to you again to: james.wilson@2020spaces.com
Please let me know if you still don’t get it.
-
June 12, 2019 at 7:48 am #240716
James Wilson
2020 ModeratorGot it, thanks Richard
-
June 13, 2019 at 3:41 am #240859
James Wilson
2020 ModeratorHi Richard
Here it is – a 360 Pano of your design in a ‘Publish’ render:
Click here to view a 360° panorama of your design
Please let me know what you think?
Thanks
James
-
June 13, 2019 at 4:07 am #240870
Richard
ParticipantThanks James.
Looks great! How long did this take to render out, please?
You were right, none of my Custom RGB, user images, or surface covering textures have come across to you, so these haven’t made it into your pano unfortunately.I wasn’t even able to render the pano for this design in Presentation Plus, let alone Publish! – And, I am still unable to do any of my kitchens in Publish render for the pano – maybe my PC spec isn’t up to it?.. Although it is a custom PC that I had built specifically…
Thanks!
-
June 13, 2019 at 4:30 am #240871
ebrahim jassat
Participanthi guys im from south africa
what spec computers do you guys use for best rendering
-
June 13, 2019 at 7:14 am #240872
Jim Smalley
2020 ModeratorHi Ebrahim – system recommendations for 2020 Fusion can be found at:
https://www.2020spaces.com/wp-content/uploads/2019/03/2020-Fusion-System-Recommendations-2019.pdf
Best wishes,
Jim
-
June 13, 2019 at 7:15 am #240873
James Wilson
2020 ModeratorHi Richard
Glad you like it 🙂 I’ve passed your issues on to the Support Team – I’m sure they’ll be reaching out to you soon.
Thanks
James
-
June 13, 2019 at 8:03 am #240875
James Wilson
2020 ModeratorHi Richard
The 360 Pano for the Publish render was completed overnight, so I’m not exactly sure how long this one took – just that it was less than 14 hours 😉 What I do know is that for every 360 Pano viewpoint defined, it will take approximately 6 times longer to generate than a standard render at the same resolution. For example, if you want to generate a 3 x viewpoint 360 Pano render at 1024 x 1024 pixels, it will take approximately 18 times longer than generating a static ‘on screen’ render at that same resolution.
I hope this helps.
James
-
June 13, 2019 at 8:26 am #240876
Larry Tamang
2020 ModeratorHi Richard,
As we discussed earlier, please do try generating a 360 Panorama of your design. Since the high renders require more processing power, generating a 360 Panorama with 4 views on Publish render would take longer time than generating 360 Panorama on lower renders.
I hope this helps.
Regards
Larry -
October 15, 2020 at 10:39 am #301301
-
April 12, 2021 at 4:53 am #323366
Michael Donovan
ParticipantStudy Rendering
-
April 12, 2021 at 4:59 am #323376
Michael Donovan
Participant2020 Fusion Designs
-
May 13, 2021 at 8:23 am #330093
Philip Shelley
ParticipantThis looks great! How did you get the ogee edge to curve on the island in this panorama? https://panorama.2020.net/view/xpqo0maek2uh51kzj8yea/
-
-
April 12, 2021 at 5:04 am #323386
Michael Donovan
Participant2020 Fusion
Attachments:
-
April 12, 2021 at 5:11 am #323405
Michael Donovan
ParticipantVarious Other Designs
-
April 12, 2021 at 5:45 am #323442
Michael Donovan
ParticipantKitchen design
Attachments:
-
April 21, 2021 at 4:26 am #324502
Tina Harper
Participantthe details are incredible, especially the reflections.
-
April 22, 2021 at 4:43 am #324748
Michael Donovan
ParticipantThank you Tina 😊
-
-
May 13, 2021 at 9:51 am #330100
darren mckeown
ParticipantHi philip, its hard to explain how i do it with you not being in the same room. but i’l try. its easy enough when you get used to it but it take time. select which worktop edge you want and start on a straight edge, then work round to the curve. you have to do it bit by bit. depending on the curve i just 20 to 50mm sections. use the Cambria worktop cat for a good selection of edges.
-
May 22, 2021 at 12:59 pm #331662
Clover Elmers
ParticipantI just want to say all the works are so amazing! I’m still learning, but hope I can share my works soon
-
June 1, 2021 at 8:45 pm #332535
Lukas -> www.szymtech.pl
ParticipantHi
I think that this new Blur (‘Bokeh’) Effect is amazing !
Have You tested it ? -
June 2, 2021 at 3:21 am #332600
James Wilson
2020 ModeratorHi Lukas
Many thanks for your feedback – we knew many of our customers would appreciate this capability.
James
-
June 2, 2021 at 3:49 am #332601
Michael Donovan
ParticipantA lounge for one of our clients
Attachments:
-
June 2, 2021 at 4:07 am #332611
James Wilson
2020 ModeratorAmazing 🙂
-
June 11, 2021 at 10:26 am #336105
Michael Donovan
ParticipantBathroom design
Attachments:
-
June 11, 2021 at 10:31 am #336115
Michael Donovan
ParticipantBathroom 2
Attachments:
-
August 17, 2021 at 8:47 am #342730
Michael Donovan
ParticipantGuest loo
Attachments:
-
August 31, 2021 at 6:24 am #344240
Jim Smalley
2020 ModeratorFantastic designs Michael – many thanks for sharing them.
-
September 1, 2021 at 8:53 am #344421
Michael Donovan
ParticipantThank you Jim
-
-
September 8, 2021 at 5:24 am #345141
Michael Donovan
ParticipantRecent Table design in Fusion
Attachments:
-
November 5, 2021 at 8:30 am #350329
Michael Donovan
ParticipantShort clip of a breakfast nook
-
November 9, 2022 at 1:59 am #378780
Michael Donovan
ParticipantOutside view of house
Attachments:
-
November 9, 2022 at 2:04 am #378790
Michael Donovan
ParticipantBoys room
Attachments:
-
November 9, 2022 at 4:09 am #378800
Jim Smalley
2020 ModeratorThanks again Michael – it’s great to see such fantastic output.
-
January 25, 2023 at 10:48 am #419145
Rhys Parry
ParticipantHi all,
Thought I’d post some of the kitchen designs I’ve done whilst using the software for a couple of months. Not the most decorated designs but pretty happy with how they look.
My instagram: gruffuddrhysparry
-
February 6, 2023 at 2:37 am #419738
Michael Donovan
ParticipantOne of the kitchens I have been working on.
Attachments:
-
February 6, 2023 at 3:32 am #419749
Lukas -> www.szymtech.pl
ParticipantWow, great job!
Where did You get those lamps ?
-
February 6, 2023 at 3:37 am #419750
Michael Donovan
ParticipantHi Lukas Thank you I made them in SketchUp
-
February 6, 2023 at 3:39 am #419751
Lukas -> www.szymtech.pl
ParticipantHow did you get that soft glow from the bulbs?
-
February 6, 2023 at 3:45 am #419752
Michael Donovan
ParticipantI changed the bulb element material colour to a yellow RGB with a glow finish and then added a lightbulb in universal lighting for the glow.
-
February 6, 2023 at 3:51 am #419753
Michael Donovan
ParticipantTV Lounge
Attachments:
-
February 6, 2023 at 4:50 am #419785
Rhys Parry
ParticipantThat’s a great render, shelves around the extractor hood is a nice touch!
Great trick for the bulbs, how did you do the coving?
-
-
February 6, 2023 at 4:00 am #419764
Michael Donovan
ParticipantA rendering of an outside area
-
February 17, 2023 at 7:47 am #419991
Michael Donovan
ParticipantHi everyone,
I have attached some renderings of a study and a bedroom
-
March 13, 2023 at 6:33 am #420567
Michael Donovan
ParticipantHi Guys new pool area proposal in 2020 Fusion
Attachments:
-
March 14, 2023 at 1:43 am #420610
Michael Donovan
ParticipantPerspective 2 pool area
Attachments:
-
March 15, 2023 at 5:37 am #420650
Jim Smalley
2020 ModeratorAs amazing as ever Michael – a fantastic set of images.
-
March 15, 2023 at 5:52 am #420651
Michael Donovan
ParticipantThank you Jim, Fusion is a really powerful program it can do just about anything. Have a good day.
-
-
March 17, 2023 at 7:05 am #420759
Michael Donovan
ParticipantHi Everyone I have attached a TV unit design I am working on.
Have a lovely day.
Attachments:
-
March 30, 2023 at 4:11 am #421430
Michael Donovan
ParticipantHere is the TV unit in the completed design.
Attachments:
-
July 2, 2023 at 4:39 am #426369
Anna Frost
ParticipantI enjoy designing websites and creating compelling visual content. But it’s more of a hobby, I don’t consider myself a professional. And if I need to develop a high-quality design of a digital product, then I usually visit this is a website and I choose the best design companies in order to be as confident as possible in the result and not make stupid mistakes during development. It seems to me that this is really the best option to save time and get a quality product.
-
October 26, 2023 at 4:47 pm #433875
Michał Tober
ParticipantKitchen 🙂
Attachments:
-
February 8, 2024 at 8:26 am #436585
Michael Donovan
ParticipantOutside patio Rendering
-
February 8, 2024 at 8:34 am #436596
Michael Donovan
ParticipantPatio
Attachments:
-
-
February 12, 2024 at 4:52 am #436625
Jim Smalley
2020 ModeratorAnother great design Michael.
-
You must be logged in to reply to this topic.